· Part Number:12513
· Cast Aluminum Cup with Baked on Powder Coat Finish
· Big enough for sows, yet small enough for baby pigs
· All Models use the same tried and proven,
• non-siphoning trouble free 393 valve
· Same bolt hole pattern on all models
· Stainless Steel trip plate and housing on all models
· Same size cup on all models
· Measures 7" X 5 1/2" X 2"
· Part Number: 16104
· Cast Iron Cup with powder coat finish “Super Strong”
· Big enough for sows, yet small enough for baby pigs
· All Models use the same tried and proven,
•non-siphoning trouble free 393 valve
· Same bolt hole pattern on all models
· Stainless Steel trip plate and housing on all models
· Same size cup on all models
· Measures 7" X 5 1/2" X 2"
· Part #: 40035
· One piece Stainless Steel Cup, totally rust-proof,
• will provide years of service
· Big enough for sows, yet small enough for baby pigs
· All Models use the same tried and proven,
• non-siphoning trouble free 393 valve
· Same bolt hole pattern on all models
· Stainless Steel trip plate and housing on all models
· Same size cup on all models
· Stainless Steel Platector covers part of the trip
• plate and housing reducing water waste
· Measures 7" X 5 1/2" X 2"
· Part Number: 16400
· Cast Iron Cup
· Built for use with large hogs
· Features our trouble-free, non-siphoning 393 Valve
· Stainless Steel trip plate and housing on all models
· Measures 9" X 6 1/2" X 2 1/2"
· Part Number: 13235
· Efficient way to provide water quickly in your pens
· Sealing Ring and Groove
· Locknut Design
· Sharper and deeper teeth
· Hexagonal / Splined Body Desdign
· Precision Machine Tapered Threads
· Insulated Throat
· Part Number: 13307
· Efficient way to provide water quickly in your pens
· Sealing Ring and Groove
· Locknut Design
· Sharper and deeper teeth
· Hexagonal / Splined Body Desdign
· Precision Machine Tapered Threads
· Insulated Throat
· Part Number: 13400
· Efficient way to provide water quickly in your pens
· Sealing Ring and Groove
· Locknut Design
· Sharper and deeper teeth
· Hexagonal / Splined Body Desdign
· Precision Machine Tapered Threads
· Insulated Throat
• Part #: 60273
• Float controlled for rapid refill. Nothing for
••your animal to activate for the water to flow.
• No training needed
• Automatic shut off when water is refilled.
• Strong high grade nylon construction with
••heavy metal guard & shield.
• Plastic float no water saturation like Styro
••foam floats.
• Water supply attaches from the top left or
••right side.
• Adjust the water level with the float
••adjustment.
• Mounts on wall using lag bolts
(not included)
• Clean fresh water is refilled back into the
••water bowl as the animals drink the water
••Drain plug molded into the bowl easy
••cleanout.
• Water bowl is angled down towards the
••drain for clean out.
• Perfect for a variety of animals including
••Dogs, Horses, Cattle, Sheep and Goats.
Replaces our dis-continued
Model GB-06 Waterer !!
Improved valve and bowl design !
· Part Number: 16871
· Entire unit is 304 Stainless Steel for long life
· Features smooth, rounded edges for animal's safety
· Easy to clean--water cleans trough surface as it swirls out
· Rapid refill rate
· Length: 14", Width: 13"
· 1.9 gallon capcity
· Non-heated unit
· Part Number:15000
· Works with LP or natural gas
· Easy to light and stays lit in the winter
· AGA listed automatic control for safe
• operation
· Thermostat and controls may be removed
• easily for service
· Adjustable brackets fit most steel, wood, poly
• or concrete tanks
· 12,400 BTU every hour if needed
· No gaskets to melt or leak
· Long-lasting heavy steel casing
· Control and burner assembly easily
• removed for servicing
· Can be shipped UPS
· Part Number: 15037
· An efficient way to prevent freezing
· Mount this unit inside the access panels
• on livestock waterers
· Runs on LP or convert to natural gas,
• developing 4050 BTU per hour
· Adjustable automatic thermostat permits
• you to control the temperature for
• whatever the condition
· Part Number: 12520
· This 450 watt, 120 volt space heater
• features range from 30 degrees to
• 150 degrees F.
·Settings:
••• Low Setting--Approximately 30 degrees ••• Medium Setting--Approximately 75 degrees
• • High Setting--Approximately 150 degrees · Only 4 amps required
· Measures 8 1/8" X 3" X 2 1/8"
· Non-submersible
· Part Number: 50000
· This kit provides the connecting
• link between an LP cylinder and
• a stock tank heater or other
• low-pressure equipment and
• appliances.
· Part Number: 70101
· A New and Exciting valve for the control of water
•• levels in troughs, tanks, fountains, you name it.
•• It is built heavy duty and long lasting.
· Cast Iron Housing
· ¾” Pipe thread top opening
· 1” Pipe Thread bottom opening
· Spring loaded valve
· 3 to 10 gpm delivery
· Stainless Steel leverage arm
