WE ARE WAIVING PROCESSING FEES UNTIL THE END OF THE YEAR!

Pig Nipple Products for Livestock Watering

Looking for the right pig nipple for your livestock watering system? Trojan Specialty Products offers pig nipples for farmers, ranchers, hog producers, and show pig owners. Whether you’re raising piglets, caring for show pigs, or managing a larger swine operation, we have options to fit different pig sizes and watering setups.

Our selection includes pig nipples for both pressurized and gravity-fed water systems. Explore our products to find the right fit for your pigs and your watering system.

What Is a Pig Nipple?

A pig nipple is a drinking-water valve that releases water when a pig bites down on the nipple. It connects to a compatible watering system and provides pigs with access to drinking water when they need it.

Pig nipples are commonly used in hog pens, piglet housing, and other swine facilities. Choosing the right one depends on the size of your pigs, your water pressure, and the type of watering system you’re using.

How to Choose the Right Pig Nipple

Not sure which pig nipple is right for your operation? Here are a few things to consider before choosing a model.

Pig Size and Age
The size of your pigs plays an important role in choosing the right nipple. Smaller pigs may have trouble using nipples designed for larger hogs, so it’s important to choose a size that works for your animals.

Trojan recommends the Spiglet and Spiglet 07 pig nipples for pigs weighing less than 50 pounds. Their smaller design is better suited to the mouths of younger, smaller pigs.

For pigs weighing over 50 pounds, we recommend the 75 Series and Oval Duct Series pig nipples, which are designed for larger pigs and hogs.

Water Pressure Requirements
Pig nipples need the right amount of water pressure to work properly. The required pressure depends on the nipple model and the type of watering system you’re using.

  • Pressurized pig nipples: Trojan’s standard pressurized nipples generally operate at 20–40 PSI.
  • Gravity-fed pig nipples: Designated gravity-fed models are suitable for standalone and other low-pressure systems operating at 10 PSI or less.

Not every pig nipple works with both types of systems, so check the specifications for your chosen model before installation.

Installation and Nipple Height
Proper nipple height makes it easier for pigs to reach the water and activate the valve. A common starting point is to install the pig nipple approximately 2 inches above the pig’s shoulder, adjusting as needed for the animal’s size and drinking posture.

Keep an eye on the height as your pigs grow. Adjusting the nipple when needed helps maintain comfortable access to drinking water.

Pig Nipples vs. Pig Water Cups

Both pig nipples and pig water cups provide drinking water, but they work a little differently.

Pig nipples release water when a pig bites down on the nipple’s trigger. Trojan’s nipple designs direct water toward the pig’s mouth to help reduce side spray and water waste.

Pig water cups provide a bowl-like drinking area where water collects when the pig nudges the trip plate. Trojan’s trip plate placement helps control water flow, allowing pigs to drink while helping reduce overfilling and water waste.

Which option works best depends on your watering system, pen setup, pig size, and management preferences. Trojan offers both pig nipples and cup waterers to accommodate different livestock watering needs.

Pig Nipple FAQs

What is a pig nipple used for?
A pig nipple provides drinking water through a valve connected to a compatible livestock watering system. When a pig activates the nipple, water flows through the valve so the animal can drink.

Which pig nipple is best for piglets?
Trojan recommends the Spiglet and Spiglet 07 pig nipples for pigs weighing less than 50 pounds. Their smaller design is suited to the mouths of younger, smaller pigs.

What water pressure does a pig nipple need?
Water pressure requirements vary by model. Trojan’s standard pressurized pig nipples generally operate at 20–40 PSI, while designated gravity-fed models are designed for standalone and low-pressure systems operating at 10 PSI or less. Always check the specifications for your selected nipple.

Can you use a pig nipple with a gravity-fed water system?
Yes, some pig nipples are designed for gravity-fed watering systems. Standard pressurized nipples may require more pressure to operate correctly, so choose a model specifically designed for your water supply.

How high should a pig nipple be installed?
A common starting point is approximately 2 inches above the pig’s shoulder. Adjust the height based on the pig’s size, drinking posture, and the nipple’s design.

What is the difference between a pig nipple and a hog nipple?
The terms pig nipple and hog nipple are often used interchangeably to describe drinking-water nipples for swine. The main consideration is choosing a nipple that’s appropriately sized for your animal and compatible with your watering system.

Shop Pig Nipples at Trojan Specialty Products

Find the right pig nipple for your livestock watering system with Trojan Specialty Products. Whether you’re raising piglets, caring for show pigs, or watering a larger herd, our selection includes pig nipples, piglet watering products, and other swine watering supplies to help you find the right fit for your animals and setup.

Explore our products to compare available options and find the pig nipple that works best for your operation.

View our inventory of Pig Nipples!

Automatic Pig Waterers Built to Last >

Scroll to Top